1. What are interlocking paver blocks?
Interlocking paver blocks are manufactured building materials made of concrete, clay, or recycled plastics. They are laid over the ground surface level & interlocked with one another, without mortar or adhesives at the joints.
Interlocking paver blocks find their usage in the pathways, gardens, footpaths, garage, parking areas, building basements, etc.
2. What are the advantages & disadvantages of paver blocks?
Advantages:
1. Appearance:
When compared to the exterior concrete or stone works, the paver blocks provide an architectural & royal look to the structures.
2. Drainage:
The paver blocks won't allow the water to clog over them in the rainy season. The periphery of these individual blocks allows water to drain out as no mortar is used to bond in the joints.
3. Wide selection:
Interlocking paver blocks are available in a wide variety of colors, patterns, models, etc. You can choose the one that suits your need.
4. Safety:
The surface of these paver blocks is layered to carry anti-skid & anti-slip properties. So, they are safe to move over in all types of weather conditions.
5. Low maintenance:
You can wash them at regular intervals just by spraying or pouring water over them. The top surface is made of higher-grade materials, it does not wear & tear easily.
6. Breakage:
If by accident, any single paver block breaks in between, you can remove & replace them.
7. Removable:
The installed paver blocks can be removed & shifted, without damaging them. Replacing the existing blockwork is easy, as no mortar is used in the joints.
8. Quick installation:
The installation work gets completed very quickly, thus saving the labor cost.
9. Environment-friendly:
It allows the rainwater to percolate in the ground, through their permeable joints. This indirectly helps in rain harvesting, up to a certain level.
Disadvantages:
1. Settlement:
If the installed paver blocks are not compacted properly, there is a chance of settlement of individual pieces. If more blocks get settled, they create an uneven surface.
2. Fading color:
Various types of metal oxides are used in the pavers, to provide the colored top surface. If the oxides are of substandard quality, the color may fade away in the near future.
3. Weed growth:
The ground surface should be neatly dressed & cleaned before installing the paver blocks. Lower workmanship may result in weed or fungal growth at the paver joints.
4. Uneven edge:
If the base layer of the paver blocks is not prepared as per the specification, you may feel bumps or ups & downs over the paver surface.
Note:
As such, the above said disadvantages are created by the poor workmanship & quality of procured blocks. You can avoid them by following the proper installation procedure & maintaining the paver quality.
For more such explanatory articles, click here.
Thank you for going through this article❤. Have a good day 😄.
No comments:
Post a Comment